Designed, manufactured, assembled, and tested in San Francisco, USA.Able to log from Innovate Motorsports 2.5mm stereo MTS data bus.Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector.Standalone datalogs to microSD / microSDHC card without a laptop.J2534 PassThru support with Windows DLL.Supports these major OBD protocols: CAN 2.0 (CAN/ISO15765), and K-line (ISO9141/ISO14230(KWP2000)/dual K line).USB 2.0 full speed device (USB-A/Mini cable included).Includes a USB cable with each OpenPort and optional adapters if you need them for your vehicle. Combined with EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress! The Tactrix OpenPort 2.0 is the newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface. Current ROM definitions look quite usable.Ģ.this clone Tactrix openport Works great and very cheap cost! Activated cruise control on Lada Granta fl.Multiple Fitments Openport 2.0 by Tactrix bin file and the openport wote to the ECU ok,it took about 98seconds to write the ROM. Tactrix Openport 2.0 is compatible work with PCMFLASH 1.20 Dongle ECU Flash Vehicles Supported by OpenPort 2.0ġ.I did a test reflash with BRZbeta ECUFLASH my stock. Supports these protocols:CAN 2.0 (CAN/ISO15765) and K-line (ISO9141/ISO14230(KWP2000)/dual K line)ģ.Work with ECUFlash software will do ECU Flash job on Subaru ,Mitsubishi Vehicles.Ĥ.As Passthru J2534 Interface it able setting to work for Xentry, ODIS (VAG),IDS (Ford /Mazda) and ECUFLASHER by ALEX…etc,But required Yourself Installed ,we do not provide service.ĥ. New PCB with inductance to increase voltage, suitable for tuning car under different voltages.Ĥ.Use the software and driver from CD ,otherwise it will brokenĭisconnect Internet when use it,otherwise it may locked!! Tactrix Openport 2.0 Passthru Interface Features:ġ.Tactrix Openport 2.0 can works for Toyota Techstream, JLR SDD DiagnosticOEM Software work prefectly. Ģ.Fixed problem that dead after 1 or 2 times used,No need worry againģ. High Quality OPENPORT 2.0 Highlights :ġ.2022 version OPENPORT ,New full chip and new module plan, Very stable and fast high speed.
With this High Quality Openport Interface ( Black PCB and Gold Pins),You will be stable use it special on Programming Job that won’t broken the ECU. Combined working with EcuFlash software the OpenPort2.0 will reflashing ECU for newer Subaru and Mitsubishi vehicles. The OpenPort 2.0 is our newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface.
Description Tactrix Openport 2.0 support Diagnostic and ECU Flashing for Toyota, Jaguar And Land Rover,Subaru ,Mitsubishi
0 kommentar(er)
